Your current location : ⎝⎛中国足彩app⎞⎠ >> News >> Technical Support

Diffuser Operation Manual

Viewed 9639 times Source: Release date: 2015-06-05 09:25:05

                                操作说明书 Diffuser Operation Manual

First, the function keys of the digital display control panel of the diffuser:

扩香机数显控制面板

ON / OFF power switch and return function

DOWN "▼" function

UP "▲" function

MENU setting and saving function

 

设置: Second, the diffuser clock setting:

On the clock display interface, press "MENU", the clock flashes, press "UP" or "DOWN" to correct the clock; press "MENU" again, the minute flashes, press "UP" or "DOWN" to correct the minute, then press "MENU" ”Save the setting value, and the machine time is calibrated.

  

Third, the fragrance diffuser time and interval settings (fragrance concentration settings):

1. On the clock display interface, press UP "▲" to display "E-ON" and then press MENU. The incense spraying time is long. Press UP "▲" to increase the incense spraying time length or press DOWN "▼" to decrease the incense spraying time length. After setting the value, press MENU to save the setting; finally press "ON / OFF" to return to the clock display interface.

2. On the clock display interface, press UP "▲" to display "E-OFF" and then press MENU. The interval time is long. Press UP "▲" to increase the interval pause time, or press DOWN "▼" to decrease the interval pause time. When adjusting After the value, press MENU to save the setting; finally press "ON / OFF" to return to the clock display interface.


Fourth, the operation setting of the diffuser in different time periods (fragrant time period setting):

1. On the clock display interface, press “▲” to select “C1-O” to set the first working time point for timing start. The time setting method is the same as “2” and press “MENU” to save. Press "▲" again to select "C1-F" to set the stop time for the first time period and save it.

第四段、第五段的开启和停止工作的时间段。 2. Select "C2", "C3", "C4", and "C5" to set the start and stop time periods of the second, third, fourth, and fifth segments, respectively.

3. Five working time periods can be set. If only one or two periods need to be enabled, the other time periods must be set to display "——:-" and save.

 

Fifth, the operation mode of the diffuser:

The best operation method: The interval setting of each spraying time and stopping the fragrance time is basically the same, for example, setting the spraying time to 60 seconds and stopping the fragrance time to 60 seconds.

 

6. The digital display control panel of the diffuser has a memory function. Even if there is an accidental power failure, the last set parameter operation can be automatically restored after the power is turned on, and there is no need to set parameters again.

 

7. In case of setting or technical problems:

1. You can check the website technical support materials;

2. Consult the technicians of the manufacturer of fragrance incense diffuser, national service phone: 020-28996075

Previous: Installation method of diffuser

Next: Instruction manual for diffuser (new control system)


    • Address: 760-762 Nandi East Road, Panyu District, Guangzhou, Guangdong Province
    • Phone: 020-28996075

    • Contact: Liu Yongquan

    • Mobile: 139 2423 8877

    • QQ: 2680492413   

粤ICP备14059753号 网站地图 Guangzhou Runxiang Environmental Protection Technology Co., Ltd. All rights reserved Record number: 粤 ICP 备 14059753 号 Sitemap
红酒批发 Friendly Link: Wholesale Wine
  • Telephone consultation

  • 020-28996075
欢乐拼三张 真人游戏平台注册 七乐彩 必赢真人娱乐